Samsung WA60H4100H User Manual

To assemble the rat protection panel on your Samsung WA60H4100H, follow these steps:

1. Remove the screws from the back panel of the washing machine.
2. Slide the rat protection panel into place.
3. Secure the panel with the screws you removed earlier.

If you need more detailed instructions, you can refer to the user manual for your washing machine.

Source: Samsung WA60H4100H User Manual - Page 19

To connect the water supply hose to your Samsung WA60H4100H washing machine, follow these steps:

1. Turn off the water supply valve.
2. Connect the straight end of the water supply hose to the water supply valve.
3. Connect the angled end of the water supply hose to the corresponding inlet on the back of the washing machine.
4. Tighten both connections with pliers.
5. Turn on the water supply valve and check for any leaks.

If you need further assistance, please refer to the user manual or contact Samsung customer support.

Source: Samsung WA60H4100H User Manual - Page 17

To clean the filter on your Samsung WA60H4100H washing machine, follow these steps:

1. Turn off the washing machine and unplug it from the power source.
2. Locate the filter at the bottom right-hand corner of the machine.
3. Open the filter cover by pulling it towards you.
4. Place a towel or container underneath the filter to catch any water that may spill out.
5. Twist the filter counterclockwise to remove it from the machine.
6. Clean the filter by rinsing it under running water and removing any debris or lint.
7. Reinsert the filter by twisting it clockwise until it clicks into place.
8. Close the filter cover and plug the machine back in.

Remember to clean the filter regularly to ensure optimal performance of your washing machine.

Source: Samsung WA60H4100H User Manual - Page 22