How do I clean the detergent dispenser on my Samsung WA50K8600A washer?

To clean the detergent dispenser on your Samsung WA50K8600A washer, follow these steps: Remove the dispenser drawer by pulling it out until it stops. Press down on the tab located at the back of the drawer and pull the drawer out completely. Remove the inserts from the dispenser drawer and clean them with warm water and a soft brush. Clean the dispenser drawer and housing with a soft brush and warm water. Reassemble the dispenser drawer and insert it back into the washer. If you have any trouble with these steps, consult your washer's user manual for more detailed instructions.

How do I troubleshoot if my Samsung WA50K8600A washer is not draining?

To troubleshoot if your Samsung WA50K8600A washer is not draining, you can try the following steps: Check the drain hose for any kinks or clogs. Straighten the hose and remove any blockages if found. Make sure the washer is level. If it's not, adjust the feet until it is. Check the drain pump filter for any debris. This filter is located at the bottom of the washer and can be accessed by removing the front panel. If none of the above steps work, there may be an issue with the drain pump itself. In this case, it's best to contact a professional for repair. Remember to always unplug the washer before attempting any troubleshooting.

How do I properly maintain the drum of my Samsung WA50K8600A washer?

To properly maintain the drum of your Samsung WA50K8600A washer, follow these steps: Clean the drum regularly with a damp cloth to remove any dirt or debris. Use only HE (high-efficiency) detergent to prevent buildup and damage to the drum. Avoid overloading the washer, as this can cause strain on the drum and affect its performance. Run a cleaning cycle with a washer cleaner product every few months to remove any buildup or odors. If you notice any damage or issues with the drum, contact Samsung customer service for assistance. Hope this helps!

Samsung WA50K8600A Series user manual in PDF // 99manuals

Name: Samsung WA50K8600A Series user manual
Brand: Samsung
Rating: 4 (1 reviews)

To clean the detergent dispenser on your Samsung WA50K8600A washer, follow these steps:

Remove the dispenser drawer by pulling it out until it stops.
Press down on the tab located at the back of the drawer and pull the drawer out completely.
Remove the inserts from the dispenser drawer and clean them with warm water and a soft brush.
Clean the dispenser drawer and housing with a soft brush and warm water.
Reassemble the dispenser drawer and insert it back into the washer.

If you have any trouble with these steps, consult your washer's user manual for more detailed instructions.

Source: Samsung WA50K8600A Series user manual - Page 47

To troubleshoot if your Samsung WA50K8600A washer is not draining, you can try the following steps:

Check the drain hose for any kinks or clogs. Straighten the hose and remove any blockages if found.
Make sure the washer is level. If it's not, adjust the feet until it is.
Check the drain pump filter for any debris. This filter is located at the bottom of the washer and can be accessed by removing the front panel.
If none of the above steps work, there may be an issue with the drain pump itself. In this case, it's best to contact a professional for repair.

Remember to always unplug the washer before attempting any troubleshooting.

Source: Samsung WA50K8600A Series user manual - Page 54

To properly maintain the drum of your Samsung WA50K8600A washer, follow these steps:

Clean the drum regularly with a damp cloth to remove any dirt or debris.
Use only HE (high-efficiency) detergent to prevent buildup and damage to the drum.
Avoid overloading the washer, as this can cause strain on the drum and affect its performance.
Run a cleaning cycle with a washer cleaner product every few months to remove any buildup or odors.
If you notice any damage or issues with the drum, contact Samsung customer service for assistance.

Hope this helps!

Source: Samsung WA50K8600A Series user manual - Page 27